Spektrum DX9 Instrukcja Obsługi Pobierz pdf (Strona 31)

31SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL

Custom Voice Setup

Use the custom voice setup function to set up custom voice alerts

ormessages.Forexample,withthecustomvoicesetupfunction

you can be alerted to a switch change report or a sequence of

alerts using the Stepping Events option. To add a new custom

voicealertorcommand,entertheCustomVoiceSetupfunction

and select Add New Sound Event with the roller. Select either

SwitchChangeReportorSteppingEvents.

Switch Change Report

Use this feature to have telemetry read in a certain switch

position, current switch position, or a variety of other alerts such

as“LandingFlaps”or“MixOn”.Beginbyselectingtheswitchyou

wish to use for the spoken alert, then select the desired setting

nexttoeachswitchposition.

Stepping Events

Stepping Events can be used to provide voice alerts when a

switch is moved stepping through a list of events. Begin by

selecting the switch desired to trigger each step through the list

(when the switch is triggered as selected, the system will move

tothenextitemonthelistgoingthroughthelistofuser-dened

selectionsonebyone.)Auto-CyclecanbeselectedtoInhibitor

Active. If inhibited, the system will go through the list 1 time only,

if the switch is triggered again when at the ﬁnal item in the list, it

will not begin at the top of the list. If Active, the system will restart

at the beginning of the list after the last item on the list with the

nextswitchtrigger.Stepsisusedtoselectthenumberofitems

on the list for the system to call. This can be set from 0 to 16.

So there can be up to 16 items called to the pilot triggered by

theswitchselected.Nextselectthealerttobespokenforeach

stepped event on the list as desired. A variety of alerts can be

chosen from the list including telemetry alerts and a variety of

ﬂight conditions and commands.

System Setup

Press here to enter the System List from the Function list without

turningthetransmitteroff.ACautionscreenwillappearthatwarns

that RF will be disabled (the transmitter will no longer transmit).

Press YES if you are sure and want to access the System List. If

you are not sure, press NOtoexittothemainscreenandcontinue

operation.

If you do not press YES or NO,thesystemwillexittothemain

screenandcontinueoperationwithinapproximately10seconds.

WARNING: Do not press YES unless the model is turned

off or the model is secured.

Monitor

The Monitor screen displays the servo positions for each channel

graphically and numerically. This is useful to verify programming

functions,trimsettings,mixdirections,etc.Thenumericvalueis

directlyrelativetothetraveladjustandmixvalues(e.g.,100%

travel adjust equals 100% value in the Monitor).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag

Spektrum DX9 Instrukcja Obsługi Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Zdalne sterowanie Spektrum DX9